Cloak trim

Warp: Blue silk
Weft: Blue DMC embroidery cotton
Brocade: Spun gold (Anchor)
Pattern: 11th-12th century chasuble
Cards: 31
Width: 2cm
Length: 60cm

This is part 1 of the weaving I did for Enith. The pattern is from EPAC, page 180. There's nothing exciting about it except that it was the first brocaded piece I did with the warp spreader (worked very nicely) and I used three strands of the brocade to try to improve coverage. It seemed to work- at least the coverage was much better than the beanie cap trim I did using otherwise identical materials.

Comments

  1. UnknownJanuary 18, 2010 at 12:48 AM

    Do you have a picture of the warp spreader? I'd be interested to see it, particularly in action.

    C.

    ReplyDelete
  2. amalieJanuary 20, 2010 at 12:50 PM

    Hopefully you have seen my next post- no photos of it in action yet but I expect I'll be using it at Canterbury Faire

    ReplyDelete

Post a Comment

Popular posts from this blog

"Anglo-Saxon" Belt

Image
UPDATE: it seems this pattern probably isn't Anglo-Saxon after all, but medieval . Warp: Red, green and white silk Weft: Green silk Pattern: Woven in diamonds Cards: 32 Width: 1 - 2.5 cm Length: 140cm What's new: not brocade OK, so this isn't a brocaded pattern. I'm getting more and more keen to try the various non-brocaded techniques and sometime next year I expect I'll drop the "brocaded" from the blog title. Not yet though because I have 3 brocaded bands queued up after this already. This pattern comes from a belt from Anglo-Saxon Cambridge. It is described on page 122 of Collingwood (2002 edition), page 53 of Hansen and on Þora sharptooth 's site. Reproductions by Þora sharptooth and Shelagh Lewins can be seen online. This pattern was calling out to me at this particular time because like the Mammen band it involves quarter-turning alternating left and right cards. It is the only non-brocaded piece I've done so far other than the bas
Read more

Oseberg Loom

Image
Here's the long-promised post about the Oseberg loom made for me by Iarnulf. Here's a link to Plate 13 from Osebergfunnet Vol. 2 with line drawings of the loom. Iarnulf has copied the dimensions closely. The wood is spruce and macrocarpa while the original was beech. The loom stands about a metre tall and is just under 2m in length. Here's a photo, taken before it was oiled. It feels great to be weaving on a documentable loom. Because it breaks down into pieces it's also very convenient for taking to camping events. The goodly length means you can go for a long time without having to reverse your twine direction (As I've mentioned before, it does make it very inconvenient for setting up in the living room!). If I had one complaint it would be that the crossbar is right where my knees want to be when sitting on my chest seat which means I can't have my lap directly below where I'm weaving so the bobbins can drop there when not in use. This could easil
Read more

Birka 6

Image
Warp: Dark green silk Brocade: Spun sterling silver (Devere) Pattern: Birka 6 Cards: 21 Width: 1.2cm Length: 2m This band is for Bjorn, in return for the replica Viking beater in the previous post, as well as a bone pickup stick and some antler bobbins which I will blog about shortly. It is very similar to the other Birka patterns I have done. Bjorn supplied me with some 28 gauge sterling silver wire to use for the brocade, but I couldn't make it turn corners sharply enough. You can see my attempt to use it at left in the picture below. When that failed I turned to Devere's sterling silver metalic thread around a cotton core. It is very nice to work with, my favourite brocade thread so far. I used it double stranded. Bjorn liked the band, originally intended for cuffs around his tunic, enough to commission more of the same- this time to go around the neck- in return for a chest, so I'm about to start on a second metre of it.
Read more